Kitchen Island Counter Top

Kitchen Island Counter Top

Kitchen eating  counter made from late 1800’s reclaimed  elm barnwood. Maintained character of original circle sawn marks, distressing, insect marring and nail holes. (Dimensions: 18" wide by 67" long by 2.5" thick)

Bar tops made from reclaimed elm barnwood. The surface was skip planed to leave a significant amount of original saw marks. Some pieces have live edges. The finish is light espresso with satin clear coat. (Dimensions: 27" wide x 27" deep / 17”wide x 155”long x 1.8”thick / 27”wide x 152”long x 1.8”thick)

We custom craft every individual reclaimed barnwood piece to our customer's specifications. Below are just a few of our handcrafted barnwood products

Bar Shelf

Kitchen Island Counter Top

Zinc Bar Tops & Waterfall Counter

Bar tops, back splash and waterfall counter top made from hand hammered zinc with custom patina finish. 

Kitchen Eating Counter

Bar top made from reclaimed rustic pine barn floor boards. Surface and edges have significant distressing with some live edges. The finish is natural with no stain or clear coat. End supports and plinths made from reclaimed 6” x 6” hand hewn pine barn beams.  (Dimensions: 20”wide x 13.5’long x 2.25”thick)

Bar Tops

Kitchen island counter made from late 1800’s reclaimed  elm barnwood.  The planks used for this countertop have very unique grain and distressing. Maintained character of original circle sawn marks, distressing, insect marring and nail holes.  (Dimensions: 27" wide by 57" long by 2.5" thick)

Kitchen island counter top made from late 1800’s reclaimed  white oak barnwood.  Maintained character of original circle sawn marks,  distressing, insect marring and nail holes. (Dimensions: 42" wide by 102" long by 1.75" thick)

Bar shelf made from brown board with live edge along entire length of board. Board has beautiful brownish red patina with wear marks/grooves cut in the top of it and knots in several places. Three corbels support the shelf and are made with live edge board. (Dimensions: 1”thick by 9” deep by 9’ long)

Bar Top with Beam Supports

Make-up Counter

Make-up counter made from reclaimed elm barnwood.  The surface has been planed to leave little distressing. The counter is cantilevered from the wall using angular supports. A 12” x 18” zinc plate with a rustic patina was added on the right side for placement of a hot curling iron. A Power chord access hole was added at the back of the counter. (Dimensions: 32”wide x 18”deep x 2.75”thick)

Kitchen island counter made from late 1800’s reclaimed red oak barnwood. Maintained character of original circle sawn marks, distressing, insect marring and nail holes. (Dimensions: 30" wide by 48" long by 1.75" thick)

Kitchen island counter top with curved eating counter made from late 1800’s reclaimed curly maple. Maintained character of original mill marks,  distressing, insect marring and nail holes. (Dimensions: 42" wide by 80" long by 1.75" thick)

Kitchen Island Counter Top